Tag: cleaning

Yesterday was… eventful.

Anyways, I now have a decent technique for thoroughly cleaning Jellycat stuffed animals! Note that the Jellycat cleaning tag specifically says to spot clean only. But that doesn’t cut it if, for example, one happens to get covered in vomit.

I’d probably use this approach for any small-to-medium sized Jellycat-like stuffed animal (no posable arms, no large plastic bits or outfits, relatively straight and short “fur”, very squishy, etc.). If you try it, do so with caution. YMMV.

1. Prepare: Place stuffed animal in appropriately-sized zippered mesh laundry bag. Before that though, if there are any “chunks” of debris (that is a horrible description, but here we are), brush and rinse them off as reasonably as you can in your sink. If you don’t do this, they will get stuck in your laundry bag and/or the fur of the stuffed animal. 🤢
2. Wash: Wash on “normal” in cold water. You want to use a setting with a good spin cycle. I would use fragrance-free detergent since scents can be off-putting or actually dangerous for some kids.
3. Dry: Let the Jellycat air dry, do not use a dryer. Before you let it air dry, go through its “fur” with a wide-toothed comb, and then follow with a fine-toothed comb to break up any mats. This will keep it fluffier for much longer. Don’t be so rough with it that you pull the fur out, just a gentle, thorough once-over will do. If you have a hair dryer, use that on a medium setting while you brush through the fur for more fluffiness.

I used to skip that last brushing step since I just hadn’t thought of it, and one of B’s favorite toys got pretty matted. Happily, brushing it out even now after it has gone through maybe 4-5 washes already has helped revive it a bit. I think it would have been even better if I had done this from the start, though.